ProFencer Junior

Description

The ProFencer Junior is made to the same high standard as the other ProFencer range

The Junior is a more basic machine, but can still handle 500m rolls of netting up to 2.5m high with the appropriate clamp fitted.

The Junior comes with 5 hydraulic functions.

• In my opinion these hydraulic functions are necessary for the machine to work to its full potential and do what a machine like this is supposed to do and that is to assist the operator to build a fence as fast as possible and with little effort.
• Top Link for levelling the machine for dispensing and for top and bottom tension on the netting.
• Loading mechanism for loading rolls of netting off the ground or trailer.
• Side shift for placing the netting out away from the tractor when dispensing, and for placing the netting close to the fence line ready for tying off.
• Tilt on the clamp for placing the netting to a vertical position ready for tying off when you are working on banksides.
• None slip hydraulic clamp.
• The netting sits on a static table which has a plastic matt to protect the galvanising on the netting when dispensing.
• The netting passers round a roller on the clamp, again to protect the netting as it is dispensed.
• The clamp is a one way clamp which means you can only dispense in one direction with the machine on the front or rear of the tractor.

All machines are powder coated for a long lasting hard finish.

The Junior machine comes with a 1.3m high one way clamp.

Tool box, tool carrier, barbed wire dispenser, quick hitch, 2.1m high one way clamp can be added as an optional extra if needed.